• ATI-Redline Lower Crank Balancer Assembly
  • 15 percent overdrive crank pulley
  • HD drive belt
  • 160 Degree High Flow Thermostat
  • Roto Fab High Capacity Cold Air Intake
  • Brisk Spark Plugs
  • Custom E92 Engine (T87A 10 speed auto transmission if equipped) Calibration
  • 1 7/8” Long Tube Stainless Steel Headers
  • High Flow cats and 3” Mid-section with X pipe
  • ATI-Redline Lower Crank Balancer Assembly
  • 15 percent overdrive crank pulley
  • HD drive belt
  • 160 Degree High Flow Thermostat
  • Roto Fab High Capacity Cold Air Intake
  • Brisk Spark Plugs
  • Custom E92 Engine (T87A 10 speed auto transmission if equipped) Calibration
  • 1 7/8” Long Tube Stainless Steel Headers
  • High Flow cats and 3” Mid-section with X pipe
  • ATI-Redline Lower Crank Balancer Assembly
  • 15 percent overdrive crank pulley
  • HD drive belt
  • 160 Degree High Flow Thermostat
  • Roto Fab High Cold Air Intake
  • Brisk Spark Plugs
  • Redline Custom Profiled Roller Camshaft with 32% fuel lobe
  • Redline Dual Valve Springs with Titanium Retainers, locks and keepers
  •  Trunnion Roller Upgrade (removes needle bearing from stock rockers)
  • Manley One piece Stainless Steel “Extreme Duty” Exhaust Valves
  • .080” Chromoly Pushrods
  • Billet DOD Delete Package (New Lifters, lifter trays, modified valley cover)
  • MLS Head Gaskets, ARP Head Bolts
  • Custom E92 Engine (T87A 10 speed auto transmission if equipped) Calibration

Content coming soon.

Content coming soon

  • WHIPPLE Superchargers 2.9 Liter or Magnuson TVS2650 Positive Displacement Supercharger
  • 1 7/8” Long Tube Stainless Steel Headers
  • Off Road  3” Mid-section with X pipe
  • Redline Custom Profiled Roller Camshaft with 38 %  Fuel Lobe (specs are required for build)
  • Redline Dual Valve Springs with Titanium Retainers, locks and keepers
  • Comp Cams Trunnion Roller Upgrade (removes needle bearing from stock rockers)
  • Manley One piece Stainless Steel “Extreme Duty” Exhaust Valves
  • .080” Chromoly Pushrods
  • Billet DOD Delete Package (New Lifters, lifter trays, modified valley cover)
  • MLS Head Gaskets, ARP Head Bolts
  • Methanol Injection System Twin Nozzle
  • Custom E92 Engine (T87A 10 speed auto transmission if equipped) Calibration
  • ProCharger F1A Centrifigul Supercharger System (PHASE 5R is available with F1A-94 Head unit)
  • Aluminum Intake Manifold
  • Alky Control Methanol Injection System Twin Nozzle
  • 2” Long Tube Stainless Steel Headers
  • Off Road 3” Mid-section with X pipe
  • Redline Custom Profiled Roller Camshaft (specs are required for build)
  • Redline Dual Valve Springs with Titanium Retainers, locks and keepers
  • Manley One piece Stainless “Extreme Duty” Steel Exhaust Valves
  • Comp Cams Trunnion Roller Upgrade (removes needle bearing from stock rockers)
  • .080” Chromoly Pushrods
  • Billet DOD Delete Package (New Lifters, lifter trays)
  • MLS Head Gaskets, ARP Head Bolts
  • Custom E92 Engine (T87A 10 speed auto transmission if equipped) Calibration
  • 416 Cubic Inched Forged Engine
  • 4.000” Forged Steel Crankshaft
  • 6.125” Forged Steel Connecting Rods
  • 4.070” Forged Aluminum Custom Direct Injection Pistons
  • 2” Stainless Steel Long Tube Headers
  • High Flow Cats with 3” X pipe and mid-section
  • PRO CHARGER F1A-94 Supercharger System
  • Redline STAGE 5-ZL-R Camshaft
  • Redline .080” Chromoly Pushrods
  • Port LT4 Cylinder Heads
  • MLS Head Gaskets
  • 160 Thermostat
  • Custom E92 Engine (T87A 10 speed auto transmission if equipped) Calibration

NOTES: Depending on camshaft selection; automatic cars may require and higher stall torque converter in the transmission for proper performance.