Gains up to 75 HP!!

  • Redline Motorsports-ATI Lower Crank Balancer
  • 15% Lower Supercharger Drive Pulley
  • HD RPM Series Drive Belt
  • Halltech High Flow Cold Air Intake
  • 160 Degree Thermostat
  • HD Crank Seal Kit
  • ARP Crank Bolt
  • Brisk Performance Spark Plugs

Custom E99 Engine Calibration

NOTE: Requires new PCM or controller to be shipped out for unlocking

Gains up to 115 HP!!

  • Redline Motorsports-ATI Lower Crank Balancer
  • 15% Lower Supercharger Drive Pulley
  • HD RPM Series Drive Belt
  • Halltech High Flow Cold Air Intake
  • 1 7/8” Stainless Steel Long Tube Headers
  • Off-road mid-section with 3” X pipe
  • 160 Degree Thermostat
  • HD Crank Seal Kit
  • ARP Crank Bolt
  • Brisk Performance Spark Plugs

Custom E99 Engine Calibration

NOTE: Requires new PCM or controller to be shipped out for unlocking

ADDITIONAL ITEMS!

  • 103mm Throttle Body
  • Methanol Injection System

Gains up to 165 HP!

  • Redline Motorsports-ATI Lower Crank Balancer
  • 15% Lower Supercharger Drive Pulley
  • HD RPM Series Drive Belt
  • Halltech High Flow Cold Air Intake
  • Redline PHASE 3 C7ZR Hydraulic Roller Camshaft with 32% Fuel Lobe
  • Redline Dual Valve Spring Kit with Titanium Retainers
  • GM Performance Race Lifters
  • Redline .080” Chromoly Pushrods
  • Trunnion Upgrade Kit
  • Manley “Pro Flow” Severe Duty 1.59” Exhaust Valves
  • 160 Degree Thermostat
  • HD Crank Seal Kit
  • ARP Crank Bolt
  • MLS Head Gaskets
  • ARP2000 Head Bolts
  • DOD Delete Plate
  • 1 7/8” Stainless Steel Long Tube Headers
  • Off-road mid-section with 3” X pipe connected to factory NPP
  • Brisk Performance Spark Plugs

Custom E99 Engine Calibration

NOTE: Requires new PCM or controller to be shipped out for unlocking

ADDITIONAL ITEMS!

  • 103mm Throttle Body
  • Methanol Injection System

Gains up to 225 HP!!

  • Ported TVS2650 Supercharger
  • Redline Motorsports-ATI Lower Crank Balancer
  • 18% Lower Supercharger Drive Pulley
  • HD RPM Series Drive Belt
  • Halltech High Flow Cold Air Intake
  • 103mm Billet Throttle Body
  • Redline PHASE 4 C7ZR Hydraulic Roller Camshaft with 38% Fuel Lobe
  • CNC Ported LT4 Cylinder Heads
  • Manley “Pro Flow” Severe Duty 1.59” Exhaust Valves
  • Redline Dual Valve Spring Kit with Titanium Retainers
  • GM Performance Race Lifters
  • Redline .080” Chromoly Pushrods
  • Trunnion Upgrade Kit
  • 160 Degree Thermostat
  • HD Crank Seal Kit
  • ARP Crank Bolt
  • MLS Head Gaskets
  • ARP2000 Head Bolts
  • DOD Delete Plate
  • 1 7/8” Stainless Steel Long Tube Headers
  • Off-road mid-section with 3” X pipe connected to factory NPP
  • Brisk Performance Spark Plugs

Custom Engine (and auto transmission if equipped) Calibration

ADDITIONAL ITEMS!

  • Methanol Injection System
  • Redline Motorsports Forged 416 ci engine (see engine build page)

Gains up to 400 HP!!

  • Forged 416 Cubic Inch LT5
    • 4.00” Forged Steel Crankshaft
    • 6.125” Forged Steel Connecting Rods
    • 4.070” Forged Aluminum DI Pistons (11.5:1 Compression)
    • Stainless Steel Piston Ring Set
    • Clevitte 77 Coated Engine Bearings
  • CNC Ported LT5 Cylinder Heads
  • Ported TVS2650 Supercharger
  • High Flow Heat Exchanger
  • Redline Motorsports-ATI Lower Crank Balancer
  • 18% Lower Supercharger Drive Pulley
  • HD RPM Series Drive Belt
  • 60 lb/ hr Supplement Fuel Injectors
  • 103mm Billet Throttle Body
  • Redline PHASE 5 ZR Hydraulic Roller Camshaft with 38% Fuel Lobe
  • Redline Dual Valve Spring Kit with Titanium Retainers
  • GM Performance Race Lifters
  • Redline .080” Chromoly Pushrods
  • Trunnion Upgrade Kit
  • Manley “Pro Flow” Severe Duty 1.59” Exhaust Valves
  • Manley Coated Titanium Intake Valves
  • 160 Degree Thermostat
  • HD Crank Seal Kit
  • ARP Crank Bolt
  • MLS Head Gaskets
  • ARP2000 Head Studs
  • DOD Delete Plate
  • 1 7/8” Stainless Steel Long Tube Headers
  • Off-road mid-section with 3” X pipe connected to factory NPP
  • Brisk Performance Spark Plugs

Custom E99 Engine (and auto transmission if equipped) Calibration